Leather Barrier

Leather Barrier Cream

Leather Barrier is designed to protect light coloured leather and vinyl from dye and print transfer. Nothing can provide 100% protection against dye transfer, but Leather Barrier will prevent the vast majority of transfer stains and make any that do occur easier to remove. Leather Barrier provides some protection against water, oil and alcohol-based stains, but for added protection we recommend applying Leather Protection Cream before applying Leather Barrier. Why does leather need protection?

Protects against: Dye and print transfer

Reapplication: Every 3-6 months, or after cleaning with a leather cleaner

Drying time: 4-5 minutes touch dry/ 30 minutes completely cured

Coverage: 1 litre will treat approximately 140-180 seats (coverage will vary depending on the absorbency of the leather)

Use with: Leather Soft Cleaner

Uses

  • Protection against dye and print transfer

Advantages

  • Water-based
  • Quick and easy to apply
  • Does not affect the look and feel of light coloured leather or vinyl leather
  • Long lasting protection
Buy on Amazon

Suitable for:

Aniline Leather

Aniline Leather

Pigmented Leather

Pigmented Leather

Pull-Up Leather

Pull-Up Leathers

Instructions:

We recommend that you apply Leather Barrier to your furniture before you use it. Always make sure your furniture is free of dirt and dust before applying Leather Barrier. If the furniture has been used, we recommend cleaning it with Leather Soft Cleaner before applying Leather Barrier.

  1. Shake the bottle well.
  2. Pour the product on to a clean, white cloth.
  3. Apply the product using circular movements. Leather Barrier does not need to be applied thickly. Apply a thin layer evenly over your furniture. Pay particular attention to those areas that come into contact with the body, such as the headrests, armrests and seats. We recommend applying two light coats to any areas that come into contact with the body. Allow to the product to dry completely between coats; this will take about 30 minutes. To shorten the drying time, the area can be dried using a hair dryer. Hold the hair dryer at least 30 cm from the leather and dry the area using a slow sweeping motion. Take care not to over-heat or burn the leather. It is not necessary to apply Leather Barrier to areas that do not come in contact with the body and aren't likely to be exposed to staining, e.g. the back panel of a lounge that positioned near a wall.
  4. Allow to dry. This will take about 30 minutes. To shorten the drying time, the area can be dried using a hair dryer.

Leather Barrier will need to be re-applied every 3-6 months. Before re-applying Leather Barrier, thoroughly clean your furniture with Leather Soft Cleaner

We strongly recommend that you check you leather for colour fastness before applying any product for the first time. This is particularly important when applying products to sensitive leathers such as aniline and nubuck. To do this apply a small amount of the product to a clean, white cloth. Rub the cloth gently on a hidden area of the furniture, check the cloth to see if any colour has transferred. Allow the area to dry for 30 minutes, and check if there are any changes to the colour of the leather. To shorten the drying time, the area can be dried using a hair dryer. Hold the hair dryer at least 30 cm from the leather and dry the area using a slow sweeping motion. Take care not to over-heat or burn the leather. If you notice colour transfer or any visible changes to the leather, do use the product on that piece of furniture. Contact us for more information.

Available in:

1 litre

1 litre

Leather care kits

Care Kits

Online retialers

leather care kits
leather care kits
leather care kits
leather care kits
leather care kits
Contact Us

Customer Service
Australia: 1300 885 010
New Zealand: 0800 888 789

Office
Phone: +612 8536 9000
Fax: +612 8536 9001